Designed for use with B&W's Turnoverball gooseneck hitch (BWGNRK1309) for your Dodge Ram 1500 or Ram 1500 truck, this ball extender moves the pivot point of your trailer 4" rearward to provide additional cab clearance.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
What's up, everybody It's AJ with etrailer.com Today, we're gonna be checking out this B&W adapter. This is gonna make your ball four inches offset for the shorter bed here on this RAM Classic. Let's check it out. This is gonna be the standard gooseneck ball you get with your B&W hitch, so fits in there just fine. But on our RAM today we have a 5 1/2 foot bed, so we don't have a whole lot of room here. So if you go to hook up, it's gonna be really tight against the cab or problematic to try and hook up.
So that's why you get this adapter that puts it at an offset. So I'll put that in just like before. It goes down in place, you latch it. And now the ball has moved from here, where this one would've been, to four inches offset. Now you're gonna have more clearance from the cab and your rig when you're driving or taking turns.
On our website, you're gonna see two different versions of this. We've gotten a lot of questions on 'em, so I wanted to point out why one will work and the other won't. First thing you wanna do is go out to your hitch, your gooseneck hitch in the back of your truck. Measure from the bottom collar to the top edge, it's about 2 1/2 inches. So already you're gonna see that this one is longer, this is gonna be 4 1/2 inches.
So if we we're to go try and use this, it would stick out up past the gooseneck and not be able to latch in, so we won't be able to use it that way. That's why this one is the one specifically for this hitch on this truck, because it has a shorter shank, so you can drop it in there, and then it'll latches in place. It's gonna be made out of a sturdy steel construction. Also, it's gonna have a gross trailer weight rating of 20,000 pounds. This is gonna have a vertical tow weight rating of 5,000 pounds.
Overall, this is gonna be easy enough to install. It's gonna help you out, get that extra clearance in the back of your truck, so you're gonna hook up your rig and get on the road. Well, I think that does it. Thanks for hanging out, and hope this helped.
Average Customer Rating: 4.8 out of 5 stars (267 Customer Reviews)
Designed for use with B&W's Turnoverball gooseneck hitch (BWGNRK1309) for your Dodge Ram 1500 or Ram 1500 truck, this ball extender moves the pivot point of your trailer 4" rearward to provide additional cab clearance.Just received this item only to find that IT DOESN'T FIT. The hole center on this item is 1 3/4" from bottom of plate and the pin on my B&W hitch is 2" below the top of the hitch (so it's off by 1/4"). I have a Dodge Ram 3500 dually and this is specifically for a Dodge. HOWEVER, apparently a different model # B&W hitch was installed by the previous owner on my particular truck. SO, I need to return this and get the one for a different model hitch (offset ball #BWGNXA4085). This means the offset ball will be sitting about 3/4" above the bed of the truck which doesn't thrill me, so I will probably put a support piece under that part even though I'm sure they will say I don't need it.
MEMO TO ETRAILER: You should mention prominently in your description that YOUR specific Dodge Ram may have a different hitch and to measure carefully before ordering.
I bought this to extend the ball close to the axle on my 13 Ram mega cab. I have the B&W hitch installed. It is built really well. Only problem I had was that the shank on the extender do sent fit far enough down in receiver for the pin to latch and had to return it. Just writing the review incase someone else has had this problem.
Although I haven’t had the gooseneck hitch or the extender installed on my truck yet, I just want to respond to the customer service I received. I spoke with two different ladies over two days and they help me figure out which hitch I needed for my truck and were extremely helpful. I was told I would receive the hitch in about a week but it showed up two days later. I’m very happy with the company and would definitely use them again
Pulled a Featherlite 4 horse slant load trailer with a sleeping berth 3 times to Arizona from Illinois this year with a 6' 4" box and had no problem with turning radius because of this ball. Works well!
Excellent service and very knowledgeable about their products. Quick delivery. Product is VERY heavy duty weighing nearly 20 pounds. Trailer is in the shop but will add to the review once I have a chance to hook up trailer and see if this adds the clearance between the nose of the trailer and cab of the truck that I need because of having a short bed.
Simple to install, solid attachment with zero rattle. Love it! Bought a different anti rattle with a lock built into it, fairly expensive, don't like it at all.
No issues, works as it should.
Great product easy to install on the Dodge Ram. Just plug everything in.
Fit right into the hitch to replace original ball.
Don’t go anywhere else unless you want a headache!
Works as advertised. No complaints.
Excellent well made American product.Fast shipping and good communication.
Was delivered on the date that was given! Great product.
Quick delivery
Do you have a question about this Trailer Hitch Ball?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.